Service Hotline
86 (0)371-86541576
You are here:Home > News >

Product Categories


Address:Changchun Road No.6 Zhengzhou City,Henan Province,China
Tel: 86 (0)371-86541576

1050 aluminum alloy characteristics and uses -Mingtai Aluminum

Date: 2019-09-01 17:02

1050 aluminum alloy characteristics:

The recrystallization starting temperature is related to the impurity content and deformation degree, generally around 200 ° C. Annealing 1050 aluminum alloy has σb = 80 to 100 MPa, σ 0.2 = 30 to 50 MPa, ζ = 35% to 40%, and HB = 25 to 30. After 60% to 80% lower deformation, although the chaos can be increased to 150 ~ 180MPa, but The devaluation has dropped to 1% ~ 1.5%.

1050 aluminum alloy

1050 aluminum alloy features:

1050 aluminum alloy has the general characteristics of aluminum, low density, good electrical and thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, strips, foils and extruded products, etc., can be gas welded, argon Arc welding, spot welding. Increasing the iron and silicon impurity content in the 1050 aluminum alloy can increase the strength but reduce the plasticity, electrical conductivity and corrosion resistance. Annealing softening characteristics and cold work hardening characteristics of industrial pure 1050 aluminum alloy. The properties of different cold work hardening states can be obtained by adjusting the annealing temperature after controlling the controlling the annealing the annealing. In order to improve the formability, it is preferred to adopt the former method.

1050 aluminum alloy

1050 aluminum alloy use:

1050 aluminum alloy is often used in daily necessities, lighting fixtures, reflectors, decorations, chemical industrial containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stampings and other products. In some cases where high corrosion resistance and formability are Required, but the strength is not high, chemical equipment is a typical use.

Mingtai Aluminum is China's leading manufacturer of 1050 aluminum alloy, which is supplied worldwide.

*Your Name:
Contact Us
Address:Changchun Road No.6 Zhengzhou City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 18538303430

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap