Service Hotline
86 (0)371-86541576
News
You are here:Home > News >

Product Categories

CONTACT US

Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
E-mail: guojianbin@hngymt.com

Use of aluminum and aluminum alloys

Date: 2019-06-12 14:23
More common grades:
 
1060, 2024, 5052, 6061, 6063, 7075.
1060:1060 is a common industrial pure aluminum with an aluminum content of not less than 99.60%. Its characteristics are: low strength, work hardening is the only way to strengthen. Good thermal and cold working properties, high thermal conductivity and excellent corrosion resistance. It is widely used in industrial equipment that requires good formability, corrosion resistance, and solderability, and can also be used as an electrical conductor material.
 
Aluminum alloy
 
The composition and structure of 2024: 2024 alloy is the same as that of 2A12 alloy. Only the content of impurities Fe and Si in 2124 alloy is lower. 2024 alloy sheets, slabs and profiles have been successfully used in the manufacture of aircraft, rocket skins, cabin sections, integral tank siding, wing rafts, etc.
 
The 5052:5052 alloy has a magnesium content of 2.5%, and is lower in the aluminum-magnesium rust-proof aluminum. Widely used in the manufacture of aircraft fuel and fuel pipes and fuel tanks, parts in various ships and transportation vehicles, sheet metal products, instruments, street lamp brackets, rivets and wires.
 
The 6061:6061 alloy is an Al-Mg-Si heat treatable reinforced aluminum alloy that can be processed into sheets, tubes, rods, shapes, wires and forgings. Widely used in building profiles, large structural parts requiring good corrosion resistance, trucks, ships, railway vehicle structural parts, ducts, homes, etc.
 
The 6063:6063 alloy is an Al-Mg-Si heat treatable reinforced aluminum alloy which can be extruded into bars, profiles and pipes. Widely used in building structural materials and decorative materials, such as door frames, window frames, siding, containers, furniture, elevators, as well as aircraft, ships, light industry departments, buildings and other decorative components of different colors.
 
The 7075:7075 alloy is Al-Zn-Mg-Cu superhard aluminum, which is characterized by good plasticity after solution treatment and heat treatment strengthening. Can be processed into sheets (aluminum and without aluminum), pipes, profiles, bars and forgings. Mainly used for aircraft structural parts and other high-strength corrosion-resistant structural parts.
Feedback
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
Contact Us
Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 13939026235
E-mail: guojianbin@hngymt.com

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap