Service Hotline
86 (0)371-86541576
News
You are here:Home > News >

Product Categories

CONTACT US

Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
E-mail: guojianbin@hngymt.com

honeycomb aluminum foil price concessions and can be customized - Mingtai aluminum

Date: 2019-07-17 15:57
Henan mingtai is China's top ten aluminum foil manufacturers, can undertake 3-2000 tons of honeycomb aluminum foil with 3003 aluminum foil, 5052 aluminum foil raw material orders, product quality stability, global export, price concessions , can be customized!

The upper and lower bottom plate and panel of aluminum honeycomb plate are made of aluminum alloy, with a thick and light honeycomb core sandwiched in the middle. Surface treatment of the panel can be fluorocarbon, rolling coating, heat transfer printing, wire drawing, oxidation; Aluminium honeycomb board still can paste compound with fire prevention board, stone material, pottery and porcelain.

The upper and lower plates and panels of aluminum honeycomb plate are mainly made of high-quality 3003-h24 or 5052-h14 alloy aluminum plate with the thickness of 0.4mm-3.0mm.Aluminum honeycomb core material is made of 3003 aluminum foil hexagonal honeycomb core, aluminum foil thickness 0.02~0.06mm, aluminum honeycomb side length models are 5mm, 6mm, 8mm, 10mm, 12mm, etc..


honeycomb aluminum foil

Using the aluminum coil produced by Mingta aluminum , the following steps are used: 1. The first step is foil surface treatment.Oil removal before coating, generally using solvent steam oil removal, alkaline washing, etc.In order to improve the bonding strength and durability of aluminum foil, chemical oxidation, passivation and phosphorus treatment can also be carried out on aluminum foil.

2. Apply aluminum foil glue in the second step.Gluing includes vertical and horizontal gluing.

3. The third step is the lamination and curing of aluminum foil.The coated aluminum foil is folded according to the number of pieces needed, and then heated and pressurized in a hot press or a hot press tank for curing.

4. Finally, the tensile forming and processing of the sandwich.There are two schemes for this step: first stretching and then processing shape and first processing shape and then stretching.Predeformation method can be used when the external curvature of aluminum honeycomb plate structure is very small.It is generally suitable for processing aluminum honeycomb plate pellets with uniform profile or straight bus profile

Ultimately ensure the high quality of honeycomb aluminum foil products
 

If you have any other questions, please feedback
  
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
 
  

Feedback
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
Contact Us
Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 13939026235
E-mail: guojianbin@hngymt.com

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap