Service Hotline
86 (0)371-86541576
News
You are here:Home > News >

Product Categories

CONTACT US

Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
E-mail: guojianbin@hngymt.com

share 3003 aluminum foil details for user

Date: 2019-11-05 10:25

The alloying element of 3003 aluminum foil is manganese, which has excellent forming processing characteristics, high corrosion resistance, good weldability and electrical conductivity, and higher strength than 1100 aluminum foil. 3003 aluminum foil is widely used in kitchen utensils, food and chemical products processing and storage devices, tanks and tanks for transporting liquid products, various pressure vessels and pipes processed by thin plates, heat exchangers, rivets, welding wires, washing machine cylinders, etc.

Chemical composition and mechanical properties of 3003 aluminum foil

Chemical composition Limits wt%: Cu 0.05-0.2 Si 0.6 Fe 0.7 Mn 1.0-1.5 Mg / Zn 0.1 Cr / Ti / Pb. Bi / Al balance. 3003 aluminum foil mechanical properties: tensile strength σb ( MPa)) 140-180, conditional yield strength σ0.2 (MPa) ) ≥ 115, sample size: all wall thickness, in addition to the longitudinal mechanical properties of the pipe at room temperature.

3003 aluminum foil

3003 aluminum foil specific performance introduction

3003 aluminum foil is AL-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum), and it can not be heat-treated and strengthened. Therefore, cold working method is used to improve its mechanical properties. 3003 aluminum foil has high plasticity in the annealed state, good plasticity in semi-cold hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability. 3003 aluminum foil is mainly used for high-load plasticity and good weldability. Low-load parts working in liquid or gaseous media, such as mailboxes, gasoline or lubricating oil pipes, various liquid containers and other small loads made with deep drawing. Parts: Wire is used to make rivets.

3003 aluminum foil

3003 alloy aluminum foil rust-proof aluminum strength

The strength of the 3003 alloy aluminum foil rust-proof aluminum is about 10% higher than that of 1100, and the formability, the weldability, and the corrosion resistance are good. 3003 aluminum foil is used to process parts that require good formability, high corrosion resistance, or require both these properties and higher strength than 1XXX alloys, such as kitchen utensils, food and chemical products. Handling and storage devices, tanks and tanks for transporting liquid products, various pressure vessels and pipes for processing with thin plates, heat sinks, cosmetic plates, photocopier drums, marine materials.

Feedback
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
Contact Us
Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 13939026235
E-mail: guojianbin@hngymt.com

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap