Service Hotline
86 (0)371-86541576
News
You are here:Home > News >

Product Categories

CONTACT US

Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
E-mail: guojianbin@hngymt.com

Mingtai 1235 alloy cable foil quality is guaranteed

Date: 2019-08-14 14:49

The role of 1235 alloy cable foil is also becoming more and more important:

The 1235 alloy cable foil is attached to the outer surface of the cable insulation medium. The rounder the outer surface of the medium, the smaller the gap between the 1235 alloy cable foil and its outer surface, and the smaller the gap, the larger the gap. Practice has proved that the smaller the gap, the better the performance of the cable. In addition, the large gap air easily invades the shielding layer and affects the service life of the cable. With the development of technology, the quality requirements for cable aluminum foil are becoming higher and higher, and the role of cable aluminum foil is becoming more and more important.
 
cable

Check the quality of the 1235 alloy cable foil:

Check the quality of the 1235 alloy cable foil. The important shielding function of the cable is 1235 aluminum foil. It plays an important role in preventing external open circuit signal interference and cable TV signal condensation. Therefore, the quality of the 1235 alloy cable foil should be checked for the new coaxial cable. First, cut off the sheath layer and observe whether the surface of the braided wire and the 1235 alloy cable foil layer maintains a good luster. Secondly, take a length of cable, tightly wound around the small metal shaft, straighten and reverse the winding, repeat several times, then cut Open the cable sheath layer to see if the cable aluminum foil is cracked. You can also cut a small piece of cable aluminum foil repeatedly in the hands and stretch it. After repeated twisting and stretching, it still has no fracture. For the defective.
 
1235 aluminum foil

1235 alloy cable foil quality is guaranteed:

The1235 alloy cable foil also has the function of preventing air from entering and causing oxidation, and preventing the relative sliding of the shielding layer from causing the electrical property to drift. However, if the 1235 alloy cable foil and the medium are too tight, the stripping inconvenience may be caused, and the construction difficulty is increased. The inspection method is to take a cable of 1 m length and remove the sheath at the end, so that the core cannot be pulled out with force. The 1235 alloy cable foil produced by Mingtai Aluminum has high tensile strength, good shielding effect and guaranteed quality.
Feedback
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
Contact Us
Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 13939026235
E-mail: guojianbin@hngymt.com

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap