Service Hotline
86 (0)371-86541576
News
You are here:Home > News >

Product Categories

CONTACT US

Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
E-mail: guojianbin@hngymt.com

the price of 3003 aluminum foil will continue to fall in the short term

Date: 2019-07-18 14:15

3003 aluminum foil current market situation

3003 aluminum foil is a variety of aluminum foil imported from the market, it is an alloy aluminum foil, and can also be used for quenching and tempering steel. Good hardenability, small heat treatment deformation, good low temperature toughness, 3003 aluminum foil thickness cutting performance, but poor weldability. It can be used for carburizing parts and tempering parts with large cross section and high load, such as gears, shafts, worms, sleeves, friction wheels, etc.
 
3003 aluminum foil
 
3003 aluminum foil has high strength and toughness and good hardenability. The performance obtained after heat treatment of the waste aluminum alloy is better than 20Cr. The quenching deformation is small, the low temperature toughness is good, and the machinability is good; but the welding performance is low. Generally used after carburizing and quenching or quenching. It is used to manufacture and reload large-section tempered parts and small-section carburized parts. It can also be used to manufacture medium- and small-impact small and medium-sized parts instead of pattern aluminum foil, such as gears, shafts, spindles, and gears. Wheel, worm, governor sleeve, etc.
 
 
3003 aluminum foil
 
In the face of the 3003 aluminum foil price reduction market that has been going on for a while, we have already weakened the water, so what is the form of the severe aluminum foil market? The supply and demand situation of aluminum foils is very serious, and the news is still low. At this time, both the manufacturer and the trader, the mentality is more pessimistic, and it is generally believed that the price center of gravity still has room to move down. As the Spring Festival is getting closer, the capital market of the alloy round steel market is beginning to tighten. Therefore, in order to withdraw funds, the price of the later alloy round steel is still in the downward channel. In summary, it is expected that the price of aluminum sheets will continue to fall in the short term. In spite of this, Henan Mingtai Aluminum Industry Co., Ltd. still insists on making unremitting efforts in the pursuit of high quality development.
 

3003 aluminum foil for the production of honeycomb aluminum core

 
The honeycomb aluminum foil produced by Mingtai Aluminum is commonly used in the state of 3003H18, and the thickness is between 0.03-0.08mm, which is mostly between 0.04-0.06mm. Features of honeycomb aluminum foil: 1. Honeycomb aluminum foil has been widely used in exterior wall decoration of high-rise buildings because of its light weight, high strength and high rigidity. 2. Honeycomb aluminum foil has low density and light weight, which can greatly reduce building load and Cost; 3, honeycomb aluminum foil intermediate interlayer contains a large amount of air, sound insulation, heat insulation, waterproof, moisture, heat preservation, no harmful gas release; 4, unit mass of specific strength, high specific stiffness, not easy to deform, the surface has a very high Flatness, good seismic performance
 

Mingtai 3003 aluminum foil price composition

The price of aluminum foil consists of two parts: “aluminum ingot price + processing fee”. Different alloys, uses, widths, thicknesses, and product prices are different. You can pass
The next way to get in touch with us, we will send you detailed quotation information within 10 minutes, look forward to your every consultation!
Feedback
*Your Name:
*E-mail:
Phone:
Country:
Company:
*Content:
Contact Us
Address: Gongyi City,Henan Province,China
Tel: 86 (0)371-86541576
Mob: 13939026235
E-mail: guojianbin@hngymt.com

Copyright © 2018-2019 MINGTAI ALUMINUM All RIGHTS RESERVED sitemap